Kool เครื่องตรวจจับห่วงสําหรับรถยนต์ยานพาหนะห่วง Pd132

#Inductive #Vehicle #Loop #Detector #for #Car #Parking #Lot #Vehicle #Loop #Detector #PD132
Inductive Vehicle Loop Detector for Car Parking Lot Vehicle Loop Detector PD132
PD132 Single Channel Inductive Vehicle Loop Detector for Car Parking Lot Vehicle Loop Detector ENGLISH VERSION

Features:
The Vehicle Loop Detector is mainly used to detect the existence and passing of vehicles
Reset Switch: The reset switch enables the detector to be manually reset during commissioning and testing. This results in the detector re-tuning the sensing loop and becoming ready for vehicle detection
Selectable Pulse Time: This feature sets the length of time that the pulse relay will be energized for 1 Second or 0.5 Seconds
Pulse Relay Selection: The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop
Sensitivity Boost : This feature sets the undetected level to maximum sensitivity and is used to prevent loss of detection of high-bed vehicles
Switch Selectable Sensibility: 4 sensitivity setting are available on the switches to allow flexibility in configuration
Switch Selectable Frequency: 4 frequency settings are available to prevent cross-talk between adjacent loops
Filter Option: This option is used to provide a delay between detection of the vehicle and switching of the output relay . This relay is normally used to prevent false detection of small or fast moving objects
Permanent Presence Option : This feature ensure detection of the vehicle will be maintained when the vehicle is parked over the loop for extended periods.

Specifications:
Model: PD132 (English version)
Power Voltage: 220VAC
Power: 4.5W
Output relays:240V/5A
Operating temperature:-20~65°C
Storage temperature:-40~85°C
Frequency range:20 kHz to 170 kHz
Temperature compensation:50°C/ h
Reaction time:10ms
Signal holding time:Unlimited/limited
SensitivityHigher:0.02% high:0.05% low:0.1% lower:0.5%
Loop inductance：Total loop plus connection wiring:50μH to 1000μH. Ideal is 100μH to 300μH
Loop connection wiring:200 meters long. The total resistance is less than 80hm twisted at least 20 times per meter
Relative humidity:<90%No condensation
Weight:283g

Package included:
1* Vehicle Loop Detector
1* User Manual