GEPRC CineLog20 HD O3 & Analog FPV Drone อุปกรณ์โดรน Drone
Summary For the shooting needs of complex indoor environments GEPRC has recently released the 2 inch Cinewhoop CineLog20. Available in Link Wasp O3 AIR Unit Walksnail and Analog four mainstream video transmission system on the market.
The CineLog20 continues the CineLog series with a lightweight pusher design and the redesigned camera gimbal vibration reduction solution provides an excellent mounting platform for O3 AIR Unit shooting which can achieve excellent anti-shake effect. The O3 AIR Unit version can shoot 4K 120fps video without mounting any camera. It is lighter in weight and has a longer battery life.
It adopts GEPRC SPEEDX2 1303.5 5500KV motor and GEP-F411-35A AIO. Equipped with Emax 4-blade propellers reasonable and efficient power system makes the CineLog20 very quiet and has a long battery life making your flight and shooting more assured. Using the one-piece injection molding camera mount you can quickly mount GEPRC naked GoPro 8/9/10/11 cameras Action2 insta360 Go2 Peanut and other light and small action cameras.
Feature - Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image with good anti-shake effect.
- Provide mainstream Link Wasp O3 AIR Unit and Walksnail HD video transmission versions Bind-N-Fly to save the trouble of building and tuning.
- 2 inch pusher design small size and lightweight more suitable for complex and narrow environments flight shooting.
- SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried.
- Continuing the vibration dampening structure of the CineLog series which can effectively eliminate the jello of the image caused by the body when flying with a Naked GoPro mounted.
- The GEPRC Teams splendid tuning and the overall flight feel are delicate and flexible.
Specifications - Model: CineLog20 Analog
- Frame: GEP-CL20
- Wheelbase: 100mm
- Gimbal plate: 2.0mm
- Top plate: 2.5mm
- Bottom plate: 1.5mm
- FC system: GEP-F411-35A AIO
- MCU: STM32F411CEU6
- Gyro: ICM 42688-P
- OSD: Betaflight OSD w/AT7456E chip
- ESC: 8Bit 35A
- VTX: GEPRC 5.8G@600mw
- Camera: Caddx Ratel2
- Antenna: GEPRC Peano 5.8G RHCP MMCX
- Motor: GR1303.5 5500KV
- Propeller: EMAX Avan Micro 22.44
- CineLog20 Analog TBSNanoRX weight: 116g
- Receiver: PNP(Without receiver) ELRS2.4G TBS Nano RX / RXSR
- Recommended battery: LiHv 4S 450mAh-660mAh
- Flight time:4-6min
Includes 1 x CineLog20 Analog
2 x 2 inch propellers (pairs)
1 x Naked GoPro Base
2 x M15*150mm battery strap
2 x Battery Silicone Pads
2 x EVA landing Pads
1 x Set of screws
1 x L-shaped screwdriver (1.5mm)
1 x Antenna fixed tube
1 x 4S Naked GoPro power cable (with balanced terminal head)
2 x EVA damping rings of guards
1 x TBS Antenna mount (Vertical Type)
1 x TBS Antenna mount (Horizontal Type)
1 x TBS Antenna printed parts
Screw package includes:
3 x M2*12mm cup head screws
2 x M2*5mm round head screws
1 x M2*8mm round head screw with pad
3 x M2*7mm round head screws
2 x M2*8mm round head screws
2 x M2 iron nuts
1 x self-clinching nut
