Dreamcradle ชุดโมเดลรถขุดไฮดรอลิก Diy ของเล่นเสริมการเรียนรู้เด็ก
❥ร้านค้าของเรามีผลิตภัณฑ์สำหรับแม่และเด็กและอุปกรณ์สัตว์เลี้ยงในราคาที่เหมาะสม และคุณจะไม่พลาดโอกาสนี้
☛ ติดตาม 【HappyTime BabyToy 】ยอดเพิ่มเติม
Feature:
1. Strengthen the cooperation between disciplines give full play to the comprehensive education function.
2. Let students learn in a comprehensive environment and apply the knowledge of multiple disciplines to solve problems in project activities.
3. Small in size easy to store and carry can improve childrens creativity and practical ability but also cultivate childrens patience
4. Children can enjoy the fun when playing with the unfinished toy building blocks. Science experiment toys exercise childrens practical ability.
5. Wooden materials are environmentally friendly non‑toxic and safe to use cultivate the ability of using their hands and brains and experience the fun of DIY.
Specification:
Item Type: DIY Excavator Model
Material: Plastic + metal elements + composite wood
Size: Approx. 15 x 11 x 1cm / 5.9 x 4.3 x 0.4in
Suitable Age: Above 4 Years Old
Usage:
1. Place the 2pcs large blocks in order
2. Take 2pcs #2 block and fix on the back with 4pcs screw
3. Take #3 and #4 block and assembly
4. Take a small syringe on the block and cover with another 3# block use the same method with small syringe and assembly with #5 and #6 block
5. Take #7 and #8 block and 2pcs screw assembly
6. Take #9 and #10 block and install on both sides with 4pcs screw
7. Take two syringe cartridges and inject 8ml of water into them without leaving any air
8. Install the two hoses firmly on the syringe and push the water inside the syringe into the hose to drain the air inside the hose
9. Connect the two syringe sizes through the hose respectively according to step 5
10. Fix both ends with iron shaft through the shaft sleeve at the hole position
11. Take the #13 block and another small syringe and fix them with iron shaft and shaft sleeve
12. Connect the lower small syringe to the #13 block and fix it with iron shaft and sleeve
13. Fix it with iron shaft and shaft sleeve according to step 6
14. Connect the small syringe at the top according to step 12
15. Take #12 block for assembly and fix it with screws at both ends
16. Completed assembly
Package List:
2 x Large Syringe2 x Small Syringe2 x Plastic Water Pipe 2 x Block 2 x Water Pipe Cable Tie 12 x Silicone Gasket 1 x Bag of Screw Accessory 1 x Screwdriver
#DIYExcavatorModel #STEMExcavatorModel #EducationalExcavatorModel #ScienceExperimentExcavatorModel #WoodenDIYExcavatorModel #DIYHydraulicExcavator