Arduino Leonardo พร้อมสาย Micro USB

Arduino Leonardo พร้อมสาย Micro USB (Arduino IDE Compatible)
บอร์ด Arduino Leonardo พร้อมสาย Micro USB


รายละเอียดเพิ่มเติม Arduino Leonardo พร้อมสาย Micro USB
Arduino Leonardo Overview
The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs) a 16 MHz crystal oscillator a micro USB connection a power jack an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Arduino Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page.

Arduino Leonardo Summary - Microcontroller ATmega32u4
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 20
- PWM Channels 7
- Analog Input Channels 12
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 32 KB (ATmega32u4) of which 4 KB used by bootloader
- SRAM 2.5 KB (ATmega32u4)
- EEPROM 1 KB (ATmega32u4)
- Clock Speed 16 MHz