💥New💥 TAMIYA MODELING TEMPLATE #74150 (ROUND 1-12.5mm) #74154 (ROUNDED RECTANGLES 1-6mm) #74156 (SQUARE 1-10mm)

#74150 TAMIYA MODELING TEMPLATE (ROUND 1-12.5mm) 89×87×0.1mm
#74154 TAMIYA MODELING TEMPLATE (ROUNDED RECTANGLES 1-6mm) 86×86×0.1mm
#74156 TAMIYA MODELING TEMPLATE (SQUARE 1-10mm) 90×90×0.1mm

ห่อ 1ชิ้น

Tamiyas engraving blades are a fine addition to any modelers tool kit allowing scribing of fine precision lines. Now you can use them to scribe curves and circles with ease thanks to this set of photo-etched stainless-steel template sheets!

• Photo-Etched Template Fret x1

#74150 TAMIYA MODELING TEMPLATE (ROUND 1-12.5mm) 89×87×0.1mm
• The fret includes 3 sheets of circular templates ranging from 1mm to 12.5mm diameters in 0.25mm intervals.
• Templates are manufactured in 0.1mm thickness stainless steel allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm)

#74154 TAMIYA MODELING TEMPLATE (ROUNDED RECTANGLES 1-6mm) 86×86×0.1mm
• The fret includes 3 sheets of rounded rectangle templates ranging from 1mm to 6mm in width and 1.5mm to 12mm in length. The smallest measures 1mm x 1.5mm and the largest 6mm x 12mm.
• Templates are manufactured in 0.1mm thickness stainless steel allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm)

#74156 TAMIYA MODELING TEMPLATE (SQUARE 1-10mm) 90×90×0.1mm
• The fret includes 4 sheets each with square templates in 0.5mm length increments between 1mm and 10mm. Every sheet has a different corner style for its squares: right angle R10% R15% and R20%. The radius of rounded corners is calculated by multiplying square side length by R (10mm square x R10% = 1mm radius corners).
• Templates are manufactured in 0.1mm thickness stainless steel allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm)