โมดูลควบคุมพัดลม 8 ทาง 12V PWM พลังงานสูง สําหรับคอมพิวเตอร์

Features:
1. Can bring 8 fans at the same time PWM fan speed regulation
2. 4-wire fans or 3-wire fans with PWM speed control ports can be used in common use. Note that the fan interface sequence is commonly used.
3. The maximum power of a single fan is within 60W and the total power is within 300W (note that the total power also depends on the power of the chassis power supply)
4. Multifunctional compatible to control multiple fans
5. The product is convenient and easy to operate

Specifications:
Working voltage: DC12V
Quiescent current: 0.015A (standby state)
PWM duty cycle: 0%-100%
PWM frequency: 25khz


Precautions:
1. Note that this model is PWM speed regulation and the speed regulation frequency is about 25K. PWM is the speed control signal P is the 12V positive pole G is the 12V negative pole do not make mistakes in the wiring sequence it will damage
2. This type of governor requires the fan with its own PWM speed control function. Two-line fans are definitely not good four-line fans are generally OK and most of the three-line fans are not. In short three-line or four-line fans need to have PWM speed control lines. It can be used if you do not understand you can contact the fan manufacturer to confirm. You can also test by yourself short-circuit the yellow wire or blue wire of the fan and the negative (black wire) of the fan. If the fan can stop it usually has a speed control function and the corresponding line is the PWM speed control line.

Packing List:
A type DC12V terminal power supply 2510-4P 8-way fan hub PWM high-power fan governor module*1
Type B DC12V graphics card 6P power supply 2510-4P 8-way fan hub PWM high-power fan governor module*1
Type C DC12V graphics card 6P power supply 2510-3P+1 8-way fan hub PWM high-power fan governor module*1
D section DC12V large 4P interface power supply 8-way fan hub PWM high-power fan governor module*1