(mt 2 & th) 6.7 สปอยเลอร์คาร์บอนไฟเบอร์ สําหรับรถยนต์

[MT2&TH]Product Introduction:
The mini spoiler wing is made of strengthened ABS / plastic material and there is carbon fiber pattern on the surface (please purchase discreetly if your do mind the plastic material)
Installation Steps:
1. Firstly clean the installation area tear off the cover of the 3M glue
2. Secondly fit it to the right position paste it on the car press on it tightly
3. Thirdly: please do not wash your car in three days after the installation it would sustains a high speed up to 120 km / hour
Note:
Because a silver plating layer is paved above the silver tail wing and the splint clamps the foot a imprint of the splint is left on each foot of the tail wing but it wont affect the overall appearance after the installation since the imprint is left inside. (We will reflect the actual information of the product to customers please do not purchase if you mind these characters thanks for your understanding and support)
Disclaimer:
Because this product is too low-key it is likely to be stolen by the green-eyed or the naughty kids. We disclaim all responsibility for damage caused by the above cases. We promise that the 3M glue we used are genuine. (Please do not allow the wing contact with water in three days after the installation and please dont drive in a high speed in this period) The wing wont be blow away even the speed exceeds 120 km / hour.
Description:
1. Material：Plastic
2.Color:Black
3.Size:17cmx4.3cmx3.4cm(6.69x1.69x1.34)
Package include:
1pcs Universal Car Tail Wing
Note:
Due to the hand measurement there have size error about 1-5mm
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same