Mitoot NEO-M8N M8N 8N High Precision GPS Built in Compass for APM AMP2.6 APM 2.8 Pixhawk
Receiver type 72-channel u-blox M8 engine
GPS/QZSS L1 C/A GLONASS L10F BeiDou B1
SBAS L1 C/A: WAAS EGNOS MSAS
Galileo-ready E1B/C (NEO-M8N)
Nav. update rate1 Single GNSS: up to 18 HZ
Concurrent GNSS: up to 10 Hz
Position accuracy2 2.0 m CEP
Acquisition2 Cold starts: 26 s
Aided starts: 2 s
Reacquisition: 1.5 s
Sensitivity2 Tracking & Nav: -167 dBm
Cold starts: -148 dBm
Hot starts: -156 dBm
Assistance AssistNow GNSS Online
AssistNow GNSS Offline (up to 35 days)3
AssistNow Autonomous (up to 6 days)
OMA SUPL & 3GPP compliant
Oscillator TCXO (NEO-M8N/Q)
Crystal (NEO-M8M)
RTC crystal Built-In
Noise figure On-chip LNA (NEO-M8M). Extra LNA for
lowest noise figure (NEO-M8N/Q)
Anti jamming Active CW detection and removal. Extra
onboard SAW band pass filter (NEO-M8N/Q)
Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)
Supported antennas Active and passive
Odometer Travelled distance
Data-logger For position velocity and time (NEO-M8N)

Operating temp. -40° C to 85° C
Storage temp. -40° C to 85° C (NEO-M8N/Q)
-40° C to 105° C (NEO-M8M)
RoHS compliant (lead-free)
Qualification according to ISO 16750
Manufactured and fully tested in ISO/TS 16949 certified production sites
Uses u-blox M8 chips qualified according to AEC-Q100

Supply voltage 1.65 V to 3.6 V (NEO-M8M)
2.7 V to 3.6 V (NEO-M8N/Q)
Power consumption4 23 mA @ 3.0 V (continuous)
5 mA @ 3.0 V Power Save Mode
(1 Hz GPS mode only)
Backup Supply 1.4 to 3.6 V

NEO-M8N-0 M8 Concurrent GNSS LCC Module
TCXO flash SAW LNA
Timepulse Configurable 0.25 Hz to 10 MHz
Mitoot #NEO-M8N #M8N #8N #High #Precision #GPS #Built-in-Compass for #APM #AMP2.6 #APM2.8 #Pixhawk